A mini
Turbo Mini Forums

Hi am after a cheap ish mini

A shell, rolling, on the road or not?

Near Edinburgh would be great!!!

Cheers Scott

what do you call cheap 500,1000 depends what your after , a rotten one would probably cost 750 upwards ,ive got a excellent shell but id be after 700 for that at least

give em hell

There is one on ebay in lanark needing a Bit of work

looks like a load of work on that one rob, stevie wonder gets a mention lol

give em hell

your looking at the purple equinox shell;

this one : http://www.ebay.co.uk/itm/MINI-1000-CITY-F...=item337e6e9739

I'm nowhere near you but the trip could be worth it for a good shell, that or meet halfway for the right price.

'New' means fitted 2500 miles ago.

I have a 1981 Mini LE Shell, bare metal respray in Fiat Broom Yellow
6 x 3mm thick metal plates welded and drilled for properly fitting a 6 point roll cage
The underside is also fully undersealed and rust free
Original glass windows
All new window and door seals
Completely stripped interiour, no headlining or interior trim and the floor has been painted in hammerite satin black.
Internally run brake, power and fuel lines, 2 fuel lines one feed and one return, both braided.
No dash clocks but dashboard included.
Black Cobra Clubmans with yellow trim and 3 point matching yellow Cobra harnesses.
Full front and rear wiring harness including the central dash switches, lights are all hooked up to the loom and working
Wipac Halogen headlamps on a separate relay fed loom
The bulkhead has been cut for a turbo bulkhead box which has been welded and heat proofed
There is no sound deadening included and the bay is again painted in hammerite black.
Solid mounted front subframe and brace bars for the flip front conversion.
New Sills
Curley Carbon miglia arches
Spax 'lowered' coil overs all round
Rear beam axle
New radius arms
All new wheel bearings
New CV joints
Minifins
Minisport alloy vented 8.4" 4-pots
KAD handbrake quadrants
Braided brake lines
Ultralite 7" x 13" deep dish wheels with Yokohama A048 tyres with plenty of life left
2 piece flip front secured with zeus fastners
Metal single skin bonnet that could do with a repaint due to some chips
Real carbon door inserts and rear panels too
Alloy door furniture
Chrome Wipers
Heater unit and matrix with blue silicone hosing (not pictured)
Stainless exhaust middle pipe (LCB back) and motorbike can muffler (not pictured)

I also have the V5, MOT till May, Keys for the ignition and doors too.

http://turbominis.co.uk/forums/index.php?p=vt&tid=170151