Buy my stuff!!! Lots more stuff added :-)
Turbo Mini Forums

Right then, post up here first to get it, and then send me a PM

Some relays £7 posted.


This can be made to fit over a mini oil cap, and is held on with grub screws. £5 posted.


Clubman boot badge £8 posted


£5 posted



Turbo water feed 12mm banjo on it never used 700mm long £5
[IMG]http://i795.photobucket.com/albums/yy231/simonhepburn/imagejpg4_zpsb9f2f389.jpg


A line lock £5


KAD Crank pulley long Bolt With a fat washer £10




A set of MAC Tools Splines, the top have been cut off so it can sit in a tool box. £35.00


1/4 Unf 12 point nuts 50p each


1/2 Unf 12 point nuts £1 each



1. A std 1275cc turbo head this has be recond before I got it, it has double springs, new seals. This is a nice starter head £250




[IMG]http://i795.photobucket.com/albums/yy231/simonhepburn/imagejpg2_zpsef88f095.jpg

Brand new Snap On magnetic socket tray £10




Brand new norbar 1/4 torque wrench never been used and comes with the calibration certificate. £40




Raychem aircraft / Motorsport Wire 24 AWG

X3 Continuous 800M reels. £30 each
X3 Continuous 1800m reels. £50 each



Raychem aircraft heat shirk job lot there is over 60m here. Very cheep!! £35




I have a brand New Hard Plastic Waterproof foam filled Carry Case. I bought it for a little job away but never needed it in the end so it's up for grabs.

This is the specs of the box, from the place I got it

This Injection Moulded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Features a continuous molded-in hinge, patent pending "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage

.Waterproof and dust tight design
.Continuous molded-in hinge for added protection
.Trigger release latch system
.Snap-down rubber over-molded cushion grip handle
.Ambient pressure equalization valve
.Resistant to UV, solvents, corrosion, fungus
.Resistant to impact damage

All foam is new and it's the sort that comes out in little squares.

The internal size of the box
Width 480mm
Length 355mm
Depth 165mm




I think it's a bargain at £95 plus the post or ONO


Fuel cut off £6 posted


Boost Gauge £15
Dump valve tee SOLD


My old alloy dash open to good offers


Also I have this down pipe for sale I would just like back what I payed on it.
http://www.turbominis.co.uk/forums/index.php?p=vt&tid=547408

Simon.

Edited by madmk1 on 20th Aug, 2014.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 20th May, 2014 Sprocket said:

On 20th May, 2014 madmk1 said:
Right then,

I have a brand New Hard Plastic Waterproof foam filled Carry Case. I bought it for a little job away but never needed it in the end so it's up for grabs.


Simon.

Was that for your dildos, oh, eh, Guns..... Selling your self on the market for hire or reward? "If you have a problem, If you can find them......"

Edited by madmk1 on 20th May, 2014.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

I think Simon could do with an avatar description to Double Hard Porn King

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Some more bits added to the top

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

RAMMSTEIN!!!

Yes i moved to the darkside

Instagram @jdm_brett

What are the switch boxes made out off?

Plastic mate.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Poop. Would have had them if they were Alu.

I'll take the dump valve T if its still available, PM'd

Sorry mate, it's gone

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

Lots of bits added

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

I'll have the screwdrivers and waterproof connectors please at MITP.

I can't see the picture of the DP but I am interested if you can get one

Jack Jones

Hhhmm that torque wrench looks familiar haha

I will get one for you mate.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

How much for the large switch box not posted?

Going MITP?

Yes I am going to MITP

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

How much for it at MITP?

PM me your number :).

Mate why not call over in that mini of yours! Your only down the road lol. Also I have a load of sexy light switches i could do you a deal on at the same time

Edited by madmk1 on 27th Jul, 2014.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

You in today?

Yes mate, I am working on the mk1

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

I'll take four of the 1/2" unf nuts please pm with total cost including post, thanks :)

Will do mate pm on it's way

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.