A few bits and a set of 6x12 superlite wheels with yoko a048's
Turbo Mini Forums

I seem to have collected lots of bits that I am unlikely to use, so thought I would offer a few bits for sale if anyone needs anything.

With photobucket messing all the photos up, I will email anyone photos of anything they are interested in.


1275 crankshaft standard size, will need a polish. £50
1275 pushrods, straight. 4 no. sets £10 per set.
1275 timing chain cover with breather. £7.50
1275 timing chain cover with flat breather £12.50
1275 small mass damper pulley £5
1275 rods with standard size pistons, pistons and rods good and usable. May even have a new set of rings to accompany £25
Pressed steel rocker cover £5
Sintered rockers £10
Coils. 3 no. £5 each
STD bottom arms £10
Std Thermostat housing £5
Standard Cams 5 no. £8 each, mostly 1275.
pressed impellor water pump, new £10
metro thermostat housing £5
standard seat mounts for a pair of front seats £5
4 wheel drive cossie intercooler £25
8.4 inch calipers good working order when removed 3 years ago, stored inside since. £20

Also need to shift my current 6x12 minilite style, with nuts and centre caps. condition pretty good, the odd light kerb mark and bit of lacquer peel here and there, but still very presentable. £225 ono. Tyres have between 3 and 3.8mm tread.

Cheers

James

Edited by minimole23 on 15th Jul, 2017.

I'll take the T3 elbow if postage itsnt ridiculous.

Cheers
Phil.

WWW.TURBO-MINI.COM

Still got this kicking round if anyone needs anything. Otherwise will ebay or bin it

Edited by minimole23 on 18th Mar, 2017.

Could do with a set of pushrods but not coming to uk before l2b and postage to belgium will probably be expensive. .. and maybe risk for getting the bend allong the way?

you can do anything if you set your mind to it...
i rather blow it up winning than keep it together losing.

finish date set for project 1... march 2018

I could certainly get them to you in one piece easily enough, otherwise happy to hang on to a set until your closer.

are the metro driveshafts complete?

Do you have a bare shaft you could measure for me? I Think they might be mini ones having dug them out.

They are 370mm and 450.

You doing l2b? Otherwise what would postage be?

Grts

you can do anything if you set your mind to it...
i rather blow it up winning than keep it together losing.

finish date set for project 1... march 2018

More than 20 miles in my car is now torture! I will look into postage and let you know.

Edited by minimole23 on 19th Mar, 2017.

Would be the weekend before i get a chance but, yes

No hurry. There not going anywhere.

What's the condition of the tyres? Which date are they manufactured?

Worst tyre has 3.1mm tread left all in good order and evenly worn. I will report back the date of manufacture at the weekend. Probably 2014.

Tyres were manufactured in mid 2013.

Few better pictures of the wheels.

Still got these wheels, could bring to brands hatch next weekend for anyone interested.

More stuff added.