Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Wanted > 2 inch Exhaust Manifold (N/A) & Exhaust system, and 3.9 SC LSD type cwp - WANTED

ministar

User Avatar

107 Posts
Member #: 10760
Advanced Member

Derby

7th Jan, 2016 at 04:13:08pm

Hello chaps,

- What exhaust manifolds do you have for an N/A motor. Any you had before you went turbo? After either LCB or 3 into 1.

- 2 inch exhaust - from manifold backwards... open to options on boxes etc, but 2'' ideally..

- And finally a 3.9 Straight Cut LSD type crownwheel and pinion (new or used). 16/62 config btw.


Cheers,
James


madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

7th Jan, 2016 at 04:25:32pm

Hi mate,

I may have a 2 box Maniflow setup that's getting retired in the next 4 months all being well. If your not in a rush?

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


ministar

User Avatar

107 Posts
Member #: 10760
Advanced Member

Derby

7th Jan, 2016 at 04:40:28pm

Hi Simon need it for the start of the season really, so 4 months may be too long. I would buy new, but if anyone had anything decent second hand i'd have it.

So, will say no for now cheers.

James.

gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

7th Jan, 2016 at 05:28:01pm

I have an sc stainless manifold that has had the mount points trimmed a little

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!


wil_h

User Avatar

9258 Posts
Member #: 123
Post Whore

Betwix Harrogate and York

7th Jan, 2016 at 07:26:57pm

I'm sure you can machine a normal 3.9 crown wheel to fit an LSD if you already have one.

I've never used an SC CWP.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

On 2nd Jan, 2013 fastcarl said:
the design shows a distinct lack of imagination,
talk about starting off with a clean sheet of paper, then not bothering to fucking draw on it,lol

On 20th Apr, 2012 Paul S said:
I'm mainly concerned about swirl in the runners caused by the tangential entry.


ministar

User Avatar

107 Posts
Member #: 10760
Advanced Member

Derby

8th Jan, 2016 at 12:11:53pm

Well, giving a bit more detail..

I have the SC crownwheel already, but the pinion is lost. Swiftune can't get a matching pinion as the crownwheel is not Quaife part.

Its an early ATB (so requires cwp like the tran x mk6 for example).

I don't have a 3.9 cwp in helical otherwise could have done that - unless anyone has one??

ministar

User Avatar

107 Posts
Member #: 10760
Advanced Member

Derby

8th Jan, 2016 at 12:13:12pm

Graham - Pm coming your way..

madmk1

User Avatar

5417 Posts
Member #: 6181
Double hard bastard

brookwood woking

8th Jan, 2016 at 02:19:39pm

I may have a 3.9 in my lock up mate, that I would happily let go.

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up.


jamestar

User Avatar

489 Posts
Member #: 9159
Senior Member

Devon

8th Jan, 2016 at 07:27:22pm

I think I have a stainless 2" link pipe in the shed and a stainless 2" playmini back box with 3" rolled outlet

Home > Wanted > 2 inch Exhaust Manifold (N/A) & Exhaust system, and 3.9 SC LSD type cwp - WANTED
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: