MS3x
Turbo Mini Forums

Hi everyone its been a very long time since I was last on here, question to all those in the know

Is the MS3x an out of box solution for the A series now or are mods required ala MS2?

Assuming we are talking about port injection on the 5 port, no mods are required. It has all the inputs and outputs required.

Not as flexible as the MS2 in terms of injection timing but gets the job done.

You may just need to get it built with the second coil driver if you wish to use wasted spark coils off the main board. Otherwise use logic driven coils straight off the MS3X.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."

Thanks Paul, good to know

So would you recomment sticking with the MS2 then?

We had 2 MS2s. Sold one, converted the other to MS3/3X. Used both, found the MS3/3X simpler to set up. Since bought and built 2 other MS3/3Xs from kits for latest projects. What do you think?

Also we could not do what we're planning with the MS2. Not enough inputs/outputs.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."