Parts for turbo engine build for sale
Turbo Mini Forums

Hello All,

Thinking of selling most of the bits I have gathered / hoarded as I am never going to get round to building a turbo engine

I will list what I have, and am open to offers.
Standard Rockers
12G940 Head - pitted chambers and seats - has been dipped, striped and cleaned so ready for machining - no visible cracks or broken studs.
Pre A plus Block Standard bores and +.10 crank
Pre A plus gearbox
Full pre A plus gearbox rebuild kit, strengthened layshaft x-pin diff. No Crown wheel and pinion.
21253 pistons (+.20) with 13cc dish machined in top. Attached to rods with rings and new bearings.
Pre a plus bell housing.
Peugeot 307 diesel undercrown oil jets
Brand new oil pump.
Straight cut drop gears - standard ratio unused, very slight surface rust - about to go on ebay....
Minispares Gray clutch pressure plate - done about 1000 miles.
Will also throw in duplex timing chain, timing plate, cam plate, a british leyland 544 profile cam, some new core and gallery plugs, central oil pick up - brand new, and a metro turbo plenum. (and other bits I find!)
MEGAJOLT box, ford edis, and some leads!
Looking for £650 the lot - well worth it if you add up the value of all the parts - pistons, x-pin dif and drop gears never fitted. I am open to offers.

James

I forgot to mention - the gearbox is in bits, all labeled and in bags.
I am located in Chester as it is all pick up only - I am prepared to drive to the M6 and meet you at a suitable location.

Edited by james753 on 1st Jan, 2014.

Is the block on Standard bores? Where are you located?

Yes it is,
The pistons would give 1293cc, but the block is not bored to match yet.

I'm located near Chester, but am prepared to drive a little to meet you if that helps.

James

Edited by james753 on 30th Dec, 2013.

I've also found a minispares gray clutch pressure plate, so that's thrown in too.
It's basically new having only done about 1000 miles
James

And found I'd collected parts for a megajolt build too! So included for an extra £50 is the megajolt box, a ford edis, some plug wires, and a machined pulley for the crank - all this is a bargain at this price - I must be mad!
James

would you sell the megajolt on its own ?

Pm me an offer - I would prefer to sell the lot as a whole though.
I have someone interested in the megajolt already too, but first refusal and it goes to you.
James

If you do decide to break I would be interested in the pistons - and I dont need the rods.

Some pictures up.

http://s292.photobucket.com/user/semaj753/...?sort=3&page=1#

Some parts are covered in grease to protect the faces, and so marks that look odd may well be grease not scoring or anything else.
Anything you want clarifying ask!

The oil pump is a turbo type brand new in box.

James

Edited by james753 on 4th Jan, 2014.

link wont work for me

http://www.fishfight.net/

Link edited sorry

How much for this part?

Reading up on RTS Clutches

Couple of pints? or swap - what have you?
HA!

You still got all this?

Flat oot like a dukes fit!

No but I have! not keeping it all though to b honest as I only wanted the early block, crank and gearbox to be honest. I might sell the straight cuts, pistons etc.

Patina=old and knackered and won't clean up

Pm me price on pistons

On me price of drops please.

Flat oot like a dukes fit!

Yes, now sold to Steve!
Cheers Mate