EDIS Coilpack Holders
Turbo Mini Forums

Hi all,

I'm selling a couple of these cheap as they have a couple of tiny flaws which means I will not sell them as a product, just to get rid of cheap and hopefully get some good feedback!

I have made some CNC machined alloy EDIS coilpack holders, which IMO look far better than anything else on the market. They are milled from 8mm aluminium, have M5 threads tapped and are supplied with stainless bolts (as pictured) for holding the coilpack in, and also bigger stainless bolts and ss nylock nuts along with aluminium spacers to mount the actual holder.

The reasons I have a couple to sell cheap? I programmed the mill wrong and made 2 which are not perfectly symmetrical. One end is slightly narrower than the other, but not really noticeable!

The double ones I have, I made 3 without a bullnose on the top edge, which does nothing apart from provide a slightly more attractive finish.

I have a new site which is not yet finished, www.topcatcustom.co.uk (mods please delete link if I am not allowed to post it), where you can see I am after £22 for a single and £29 for a double holder, plus post, I'd like just £15 POSTED for the singles here and £20 POSTED for the doubles.

I only have 1 single one left and 3 double ones I can sell cheaply, the doubles are intended for V8's etc however I am planning on using one on my rally mini with another coilpack mounted as a spare so I can quickly swap the leads over if I get any trouble.

www.topcatcustom.co.uk

PMed about single

That was quick!

I actually have one more single which I wasn't going to include but will let it go too if anyone else wants it.

www.topcatcustom.co.uk

pm'ed about other single

Ok singles gone unless payment doesn't go through on any of them.

www.topcatcustom.co.uk

could i have seconds on a single if one falls through please. If not we need mre singles lol

Done now needs redoing lol

Also interested if one becomes available..

““A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.”” - Jeremy Clarkson

Lol, all 3 are wrapped up and will be posted tomorrow, looks like I'd better zero up the jig and make a batch then! I'd like to get them annodised but the local place to me has something like a £75 monthly minimum invoice and theres no way I can make that many bits let along get £75 back on them! Will keep thinking though...

www.topcatcustom.co.uk

keep us posted when you get some made up they look great

Done now needs redoing lol

they look very nice I will take one when you have another lot sorted.

Cheers all, the mill is set up for another job at the moment (to do with the weld in seat mounts that are flying off the shelf!) so when I'm done I'll get a batch made up.

The shop on my website doesn't have any option for different postage rates unfortunately which is a pain, so I'm trying to juggle prices around so they come out fair when postage is added, of course if I sell any privately I can do them for a little less anyway :)

www.topcatcustom.co.uk

arrived today. nice piece

cheers

Mine arrived today too. Awesome!

Mine arrived today too. Awesome!

Mine arrived today too. Awesome!

Excellent cheers guys, perhaps you could post a pic once mounted to see how you got on.

www.topcatcustom.co.uk

will do but got to work out where i'm mounting it first......

just wondered if you had made any more of these?

Done now needs redoing lol

Hey, yes I've made up a small batch but work is so bloody busy I've not got round to cutting the spacer tubes or (obviously) listing them for sale, I can't really do these for the £15 posted price of the original ones that weren't quite perfect, just take too much time to do. I'll try and get a load of spacers cut etc, was also going to look into getting a batch annodised but not had enough time to get a big enough batch to justify it! (If you haven't guessed it yet, time is my biggest enemy at the moment, maybe time to think about getting an employee.........)

www.topcatcustom.co.uk

Hi Do you still make these?

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

the post was 2012

Yea someone might have some spare?

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985