Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > For Sale > Rare Refurbished 12x5 Cosmic Wheels

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

8th Dec, 2010 at 08:24:37am

Rare 12" x 5" Cosmic Alloy wheels.

The wheels have beet shot blasted:



Primed and spray painted Rover Cashmere Gold, both in 2 PAC:



The low sections hand painted in Black 2 PAC:



And then back to the spray booth for several coats of laquer.



There is some kerb damage to some of the wheels, but it's not really noticable.

I have a set of brand new genuine centres for them with retaining spring clips (not pictured).

I also have a 5th wheel that is unrefurbished and has a worn out tyre fitted.

Happy to arrange a courier at your expense or meet within a reasonable distance of Rotherham.

The only other set of 12" Cosmics that I have seen fetched £200 in an unrestored state. These wheels are only for sale as I now have a set of Force Racing 3 piece split rims.

EDIT: Looking for £200

Edited by apbellamy on 9th Dec, 2010.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

Vegard

User Avatar

7763 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

8th Dec, 2010 at 09:25:37am

Are these 4X4" PCD?

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

8th Dec, 2010 at 09:28:01am

Yes. Happy to fit one to my car to confirm.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

cossierick

User Avatar

3074 Posts
Member #: 1348
Post Whore

wakefield West Yorks

8th Dec, 2010 at 09:32:31am

Ohh very nice

rick

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

8th Dec, 2010 at 09:35:10am

They'd suit your black clubman Rick *wink*

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

Vegard

User Avatar

7763 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

8th Dec, 2010 at 09:55:14am

Could these be drilled to suit 4X4,5" on the other four spokes? Is there enough meat?

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

8th Dec, 2010 at 10:07:00am

I'd have to measure, but I would expect so. I won't be home tonight so can't give an imediate answer.

Alternativly, the seat for the wheel nut is a seperate unit pressed into a larger hole in the wheel. It may be possible to get some made with an offset stud hole in them to suit your application. Now that I mention that, the 5th wheel is missing one...

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

EricsAmerica

User Avatar

141 Posts
Member #: 7891
Advanced Member

Annapolis, MD USA

8th Dec, 2010 at 11:42:15am

Nice job on the re-furb....want to do mine for me...


On 8th Dec, 2010 Vegard said:
Could these be drilled to suit 4X4,5" on the other four spokes? Is there enough meat?


Vegard, you looking for some for the ADO? I have a set of both of these....I'll look to see how they are drilled compared to these pics to see if they may work for you....

Here are mine...

*happy**happy*

Eric
my pics.... http://www.fototime.com/inv/7AAF37CF3EFA956


apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

8th Dec, 2010 at 11:48:29am

On 8th Dec, 2010 EricsAmerica said:
Nice job on the re-furb....want to do mine for me...

Sure, just drop them in the post *wink*

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

9th Dec, 2010 at 07:36:26pm

I don't think you could drill new holes for 4.5" PCD V.



It should be easy enough open up the existing holes and fit new inserts.

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*

Vegard

User Avatar

7763 Posts
Member #: 74
I pick holes in everything..

Chief ancient post excavator

Norway

9th Dec, 2010 at 08:23:56pm

I agree.

Eric, yes, I'm looking for some for my 1300 if I ever get it running *wink*

On 13th Jul, 2012 Ben H said:
Mine gets in the way a bit, but only when it is up. If it is down it does not cause a problem.

apbellamy

User Avatar

16540 Posts
Member #: 4241
King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner

Rotherham, South Yorkshire

10th Jan, 2011 at 08:35:14am

Sold

On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it

*hehe!*
Home > For Sale > Rare Refurbished 12x5 Cosmic Wheels
Users viewing this thread: none. (+ 1 Guests)  
To post messages you must be logged in!
Username: Password:
Page: