my side show bike build "dr 800 gravel Bratstyle"
Turbo Mini Forums

well one person here was intrested in my bike build, enjoy the bike build

8-)

Edited by G13B on 12th Feb, 2010.

internationally known as "big" swede

Steve McQueen style... nice.

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Very cool

spot on dude

Cheers guys, hope it will turn out classy and fast, it sits really low and the wheelbase is shortened about 15-20 cm from stock bike, interesting to see how it rides



Sr43 frame, cut down where the new shocks mounts
Sr500 swing arm ( the same axle diameters as dr800, only needs 2 5mm shims at the frame mounting point)
Sr shocks
6" 20 deg K&N flattrack filters
Honda 250 "rebel" fuel tank
2" exhaust and alloy supertrapp
evac valve
2x34 mikuni rs flatside carbs (will install powerjets for even simpler tuning and the benefit of multible spray patterns)
28,6 fatbar + risers
15 cm fork inserts (lowers the fork – 15 cm)
Front light is a special, bosch casing and mini net, random H4 beam inside
Ultima bobber seat
Dr800 speedo
Will fit a FIA switch instead of keys
pirelli mt 21 rallie tires 130 rear/100 front

internationally known as "big" swede

You have too much space

I seriously doubt it!

nah, i have to much crap!

internationally known as "big" swede

I want one :)

BTW - I took my buddy VTEC Pete out for a spin this weekend, and even though I am running her in, he gave it a name, the "Brocket"...cause I'm a brocket maaannn, nah nah nah nah nah nah nah nah nah nah nah....

Build thread - http://www.turbominis.co.uk/forums/index.php?p=vt&tid=7483

Katy Mini Owners Club Thread - http://www.turbominis.co.uk/forums/index.php?p=vt&tid=505552

Let's make sure you embarrass at least one VTEC MINI today !

https://www.facebook.com/groups/17557298589...096464253807802

That looks awesome

But why isnt it bare metal?

i just think you must be one horrible person to post a pic of your bike on here, this is a mini only place!
i hate that you have a bike like that!
it fills me with rage & disgust to have such a lethal machine!!!!!!





























WHY because ifckin jealous as fook! thats one cool bike! i'd love to have a motorbike again! & that style floats my boat! plz let m have a go on it!!!!!! just in the paddock at mini showdown!
cool bike there dude! love it! really like it alot

SKYLINES ARE LIKE CLITS, EVERY FLANGE SEEMS TO HAVE ONE: see this sticker on my silvia

the Search-section on this forum is blummin superb & simple to use, unlike some other forums, without the search-section & the help of this bunch of chaps on here i'll never be able to !!!Start the day with a 998cc turbo!!! :) i'm getting closer though!

Tom Fenton says: I have it all, make me an offer

That's pretty cool, although the red one in the first photo is more my style.

Fastest 998 mini in the world? 13.05 1/4 mile 106mph

www.twin-turbo.co.uk

love the style

1972 998 TURBO SLEEPER

internationally known as "big" swede

supercool

"Turbo's make torque, and torque makes fun"

"did you know you can toast potato waffles?"

Too glad I asked about it

Really like it !

I am quite sure a short wheel base DR 800 will lift the front wheel for a yes or for a no, be careful !

Rusty by nature

On 27th Feb, 2010 Advantage said:
Too glad I asked about it

Really like it !

I am quite sure a short wheel base DR 800 will lift the front wheel for a yes or for a no, be careful !

internationally known as "big" swede

Especially with flat slide carbs, am I right ?

Rusty by nature

well with flatslides you dictate the throttle opening speed with your wrist, no vacum oem bullshit, so i guess it´s a yes!

Have a rack with 40s on the mini and they are very drivable, but if you drop the hammer from idle there will be a bit of hesitation and then hell breaks loose, lol

internationally known as "big" swede

Love the beer can under the speedo, you should keep that as a permanant fixture

& is that an "Evacupan" breathing system to the exhaust that i see there?

& gotta love that look man, well done

I might have to do that to my KX500

www.miniman.com.au

"""LazyGoodForNothingSmartArseKnowItAllBackYardMiniMechanic"""

Regarding the hesitation if you can get the correct needles and jeting you can eliminate all hesitation,but it would take a lot of time even if you have the correct parts.
I have a set on a bike and it runs perfect it took loads of time to get rite.
Allan (Honda RC30)

Edited by AllanMcD on 1st Mar, 2010.

http://www.rabdunn.co.uk/

cheers, yep evacupan

do it to your KX and show us

internationally known as "big" swede

Took the bike to work today and test drove it:) Have only the front brake connected so it was time to take it gently on the gravel ... real hungry on the throttle now with a 2" exhaust and flatslides, sounds damn attractive also, significantly rougher than before: yoparty
The final weight of 155kg, no gas.
Now I tear it down for the final welding / cutting away unnecessary brackets on the frame and paint.

here are some pics from the lunch hour avantage

fueling with homemade funnel, managed to spill gasoline over nearly the whole cycle ...
[IMG] http://img28.imageshack.us/img28/3107/dsc00159oe.jpg [/ IMG]
[IMG] http://img227.imageshack.us/img227/443/dsc00169rs.jpg [/ IMG]
[IMG] http://img227.imageshack.us/img227/2797/dsc00170t.jpg [/ IMG]
[IMG] http://img687.imageshack.us/img687/356/dsc00164pw.jpg [/ IMG]

roup a bit on the runner-up: thumb NT
[IMG] http://img227.imageshack.us/img227/8900/dsc00163p.jpg [/ IMG]
[IMG] http://img94.imageshack.us/img94/802/dsc00160ud.jpg [/ IMG]

[IMG] http://img227.imageshack.us/img227/3581/dsc00167h.jpg [/ IMG]

internationally known as "big" swede

roup a bit on the runner-up: thumb NT




[/quote]

Exhaust wise, are you happy with this setup ?

Rusty by nature

Exhaust wise, are you happy with this setup ?

Rusty by nature