| Page: |
| Home > Show Us Yours! > Minus 7 port turbo | |||||||
|
224 Posts Member #: 9987 Senior Member Amsterdam |
1st May, 2018 at 08:56:00pm
What’s the diff like? |
||||||
 4625 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
1st May, 2018 at 09:10:31pm
What head gasket you using Jonny ?
|
||||||
 2094 Posts Member #: 9894 Post Whore Dorking |
1st May, 2018 at 09:41:24pm
On 1st May, 2018 minimole23 said:
Impressed you got this all together, and working well. Be good to see some in car footage at Blyton. Some of it is a bit Heath Robinson at the moment to get it done. Don’t be to impressed haha. There was quite a few moments where I thought it wouldn’t happen. Loads of stupid things out my control. MED held me back the most, was not impressed, waited I think 4-5 weeks for a crank that didn’t exsist lol. I’ll bring the GoPro, I’m useless at setting it up so don’t expect much! On 1st May, 2018 Evoderby said:
What’s the diff like? I haven’t pushed it enough to say yet. It’s given it some more torque steer (it didn’t really have any before) but definately gets the power down better. Although the extra power will be adding to the torque steer I imagine. On 1st May, 2018 Turbo Phil said:
What head gasket you using Jonny ? Phil. Using a cometic dry deck gasket from MED, head and block are plugged. Went for the dry deck as I figured it would be better to have the extra gasket integrity. Don’t use anything with fire rings! It needed quite the skim to sort that. I think An af460 on bk450 was used on it. Had pressed in between 2-3 quite a lot. http://www.med-engineering.co.uk/products/...gasket-20-40-60 |
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
10th Nov, 2018 at 08:56:53pm
I have not updated this for a while.
Edited by jonny f on 10th Nov, 2018. |
||||||
|
4625 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
10th Nov, 2018 at 10:47:06pm
Good effort, it's nice to see you're still plugging away. How's the 7 port going ?
|
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
10th Nov, 2018 at 11:24:23pm
On 10th Nov, 2018 Turbo Phil said:
Good effort, it's nice to see you're still plugging away. How's the 7 port going ? Phil. It's a never ending project haha. I'm really liking it. I do want to make it a bit easier to work around. Its pretty cramped in my car. Be nice to be able to get to the plugs without having to rip it to bits! hopefully that will come this winter with a few changes. Plan to get a better flowing IC and exhaust manifold which should free up some more power. |
||||||
|
4625 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
11th Nov, 2018 at 01:10:46am
Are you using the SC plenum ?
|
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
11th Nov, 2018 at 07:36:01am
On 11th Nov, 2018 Turbo Phil said:
Are you using the SC plenum ? Phil. No, didn't want to use itb's so just used a single TB. Doubt SC setup would of fitted under the bonnet. As i have a lot less room. |
||||||
 1648 Posts Member #: 9038 Post Whore Carlisle, Cumbria |
11th Nov, 2018 at 05:38:37pm
Seen the pictures on facebook i think. Looking good, how much does this weigh? |
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
11th Nov, 2018 at 06:55:47pm
Not had it weighed for a couple of years, estimate about 540. |
||||||
|
4625 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
11th Nov, 2018 at 08:54:32pm
How much was the Owens gear lever ? Can't find it on the website.
|
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
11th Nov, 2018 at 11:55:26pm
On 11th Nov, 2018 Turbo Phil said:
How much was the Owens gear lever ? Can't find it on the website. Phil. Hopefully this works. https://www.facebook.com/owensfabrication/p...?type=3&theater |
||||||
|
4625 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
13th Nov, 2018 at 10:14:42pm
It just takes me to their FB page. No worries I'll drop them a message. Cheers mate.
|
||||||
 4890 Posts Member #: 1775 Post Whore Chester |
13th Nov, 2018 at 11:38:23pm
Phil the link states £385. I run a supercharger and I don't care the TB is on the wrong side.
|
||||||
|
4625 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
14th Nov, 2018 at 01:03:10am
Strange, it's working now cheers.
|
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
24th Nov, 2018 at 10:59:49am
Got a bit more weight out :).
Edited by jonny f on 24th Nov, 2018. |
||||||
|
4625 Posts Member #: 20 My sister is so fit I won't show anyone her picture Lake District |
24th Nov, 2018 at 12:16:39pm
Impressive effort !
|
||||||
|
450 Posts Member #: 10396 Advanced Member Formerly mk2turbo Stoke-on-Trent |
24th Nov, 2018 at 01:07:43pm
That's a good saving, a little bit off everything soon adds up! |
||||||
 7265 Posts Member #: 1268 The Boom Boom speaker Police! Essex |
25th Nov, 2018 at 11:58:25am
Excellent stuff In the 13's at last!.. Just |
||||||
 2974 Posts Member #: 10749 Post Whore lowestoft suffolk |
25th Nov, 2018 at 09:27:06pm
Thats impressive work there jonny!!
On 24th Oct, 2015 jonny f said:
Nothing gets past Dave lol NOTHING GETS PAST ME!! 
1/4 mile 14.7 @ 96mph 12psi boost Showdown class A 2nd place 18.6 @ 69mph |
||||||
|
4890 Posts Member #: 1775 Post Whore Chester |
25th Nov, 2018 at 09:31:18pm
Doesn’t the lip on the brake drums add a lot of strength? I run a supercharger and I don't care the TB is on the wrong side.
|
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
26th Nov, 2018 at 07:07:45am
Thanks fellas.
|
||||||
|
4890 Posts Member #: 1775 Post Whore Chester |
26th Nov, 2018 at 01:10:23pm
I get what your saying, does the max pic not show a different colour material, maybe a steel ring as part of the drum insert maybe? I run a supercharger and I don't care the TB is on the wrong side.
|
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
26th Nov, 2018 at 07:04:23pm
On 26th Nov, 2018 gr4h4m said:
I get what your saying, does the max pic not show a different colour material, maybe a steel ring as part of the drum insert maybe? No, slightly hard to explain. If you look at my original drum (pre turned down) photo the last inner lip is what you can see in KAD's photo. You can't see it on my photo but its there. You wouldn't want to take them all they way down to that, would get quite thin. |
||||||
|
2094 Posts Member #: 9894 Post Whore Dorking |
7th Dec, 2018 at 11:36:30am
Have made some new handbrake levers. It is taking quite a bit of time to go through all these bits. Am getting there though.
Edited by jonny f on 7th Dec, 2018. |
||||||
| Home > Show Us Yours! > Minus 7 port turbo | |||||||
|
|||||||
| Page: |