MicroSquirt Engine Woes
Turbo Mini Forums

Ive just blatted them across in an email buddy

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

Received.

I need the composite log for the trigger wheel, the "tooth" one hasn't got enough detail.

From the data log, from the short attempts to start, I see the failure to synch but, on a positive note, I now see valid AFR readings.

This should be a simple configuration issue.

Re-run the tooth logger as "composite" for the attempt to start and re-email me the whole project file (like the way I said before) since you have changed it to microsquirt.

Schrödinger's cat - so which one am I ???

Ok Rod ill nip in the Garage tonight and do a Composite Log for you matey.

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

A post on the msextra forum reminded me of something. You don't mention it but make sure you are running resistor spark plugs. The non-resistor ones almost always cause noise issues especially on the tach input.

http://www.jbperf.com/

Schrödinger's cat - so which one am I ???

turbo 16v k-series 11.9@118.9 :)

Denis O'Brien.

Sorry for the slow reply guys, stupid Life getting in the way of Garage time

Ill ping the Composite log accross later tonight

I swung by the scrappers and found a clock work dizzy and coil for £20 so that could be an option if all else fails.

On a dummy note, how do I tell if the Spark plugs are Resistor type? "EDIT" - (Look for an R in the Model Number)

Thanks again fellas!

Edited by MikeRace on 18th Jul, 2017.

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

Engine now runs on a Dizzy.

Ticks over pretty high so need to figure out where in the settings I can sort that.

Theres also the issue of the Manifold Glowing Orange on tickover :/

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

SUCCESS!

After much head scratching/swearing and a few cups of tea I manage to whittle down alot of my issues to a jammed open bloody IAC Valve!

Took the IAC off and jammed my finger in the hole It ran lovely.

So sorted that and it runs nice. I also went and bought the Full Software so hopefully that should make tuning easier. Ive also somehow managed to turn off the 2nd channel of the ECU again?? so running all injectors off 1 at the moment so need to suss out what ive manage to cock up. Im wondering if there is a continuity issue somewhere in my loom. Or ive manage to turn it off in the software somehow?

Thanks to everyone Rod and Rob especially!

Cheers chaps!

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

https://youtu.be/QykxnSmpKrw

1/4 Mile 14.3secs 96Mph Terminal 10psi of boost.


Fibreglass Parts? - http://www.tdkracing.co.uk/
Split Rims? - http://www.force-racing.co.uk/

Nice to see it running. You can spend some time on the other one now.

In the 13's at last!.. Just