| Page: |
| Home > Show Us Yours! > My Budget(ish) Turbo mini build. | |||||||
 20 Posts Member #: 10662 Member |
18th Nov, 2013 at 12:07:16pm
Just another small update after a couple of evenings. Painted up the calipers and fitted them using minispares bolts. Cut the A panels off, dropped the subframe to fit the solid mounts (what a bitch that was!) any feedback is appreciated.
|
||||||
|
Site Admin  15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
18th Nov, 2013 at 12:18:23pm
That caliper looks to me like its fitted upside down (e.g. wrong side) in that last photo.
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
|
20 Posts Member #: 10662 Member |
18th Nov, 2013 at 12:35:41pm
You are quite possibly right. I wasn't sure so just had a guess for now. (pads and everything still need to be fitted yet) i have fitted them so that the bleed nipple are facing down. Is that incorrect? Thanks |
||||||
 1849 Posts Member #: 672 The oversills police Oslo, Norway |
18th Nov, 2013 at 12:37:37pm
yes |
||||||
 12307 Posts Member #: 565 Carlos Fandango Burnham-on-Crouch, Essex |
18th Nov, 2013 at 12:40:59pm
Air will go to the top so bleed nipples go to the top... so the air comes out. On 28th Aug, 2011 Kean said:
At the risk of being sigged... Joe, do you have a photo of your tool? http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1 https://joe1977.imgbb.com/ |
||||||
|
20 Posts Member #: 10662 Member |
18th Nov, 2013 at 12:59:50pm
Thanks Guys, I will get them swapped around! |
||||||
|
20 Posts Member #: 10662 Member |
28th Nov, 2013 at 03:38:40pm
Few small updates again. I have stripped down the engine. please have a look at the pictures below and let me know what you think of the condition of the Crank.
|
||||||
|
20 Posts Member #: 10662 Member |
28th Nov, 2013 at 03:41:55pm
Also starting to "mod" my autoplas dash ( still a lot to do), replace the pedalbox bolts and fit them along with the master cylinders.
|
||||||
 7265 Posts Member #: 1268 The Boom Boom speaker Police! Essex |
28th Nov, 2013 at 05:19:58pm
Crank looks like it'll go again. Take it to a decent machine shop for a polish and they'll tell you how worn it is. In the 13's at last!.. Just |
||||||
| Home > Show Us Yours! > My Budget(ish) Turbo mini build. | |||||||
|
|||||||
| Page: |