Gauging interest GT17 manifold- UPDATE 08/01
Turbo Mini Forums

Matty I have "shoes" sized box behind my engine , should clear even the bigs stuffs .
will it clear my twins inlet manifold?
if it does 300 is fine for me.

cheers
fab

Oh right then it should be fine! Im using a standard inlet to model mine. How does the twin inlet differ? If it sits lower then I can make allowances for clearance.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Hey Matty. Can you post a picture or two of the 'better flowing' more expensive manifold as i dont know which one to choose. Either way i dont want to chop the bulkhead. Thanks

Here's a pic of the other manifold.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

I'm not being dumb by asking this question am I but it will still allow for the turbo inlet manifold to be used?

http://photobucket.com/quintonrose

I'm interested in either, probably the first one if i need a bulk head box for the second one, let me know when you need the deposit.

so the pic on this page is the higher flowing one which will need bulkhead mods.

does it flow better than a ported, standerd metro manifold. i know it may be impossible to answer that question, but i will ask any way!!lol

thanks

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

looking at these manifold tube it certainly flow a lot more than the std mety manifold, question is:
is it needed? a std mety manifold can be ported to high flow the only restriction that is difficult to port is 1 and 4 cylinders 90 ° bend after exhaust port

I am down for the higher flowing on. Can send deposit whenever.

il possibly be after one depending on when you need the deposit

I couldn't say whether they flow more or less than a standard metty one, as I haven't put them on a flow bench. Going by the bore size and shape I'd be very surprised if they flowed less!

As for the manifold, can someone confirm whether the turbo manifolds sit higher or lower than the standard one?

Deposites all depend on when people want them? I'll need 4 - 6 weeks from the time I receive the last deposite to the time of completion. Would people that want one, be able to start a list, saying which type they want, and when they would like it by.

e.g.

1. Matty, higher flowing type, 8 weeks

Edited by matty on 6th Oct, 2010.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

1. Theoneeyedlizard, higher flowing type, after christmas.

In the 13's at last!.. Just

1. Theoneeyedlizard, higher flowing type, after christmas
2.JT-higher flowing one, whenever

just one question, is the higher flowing one £300??

thanks
josh

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

oi!!!

you jumping the que??? :)


1. Theoneeyedlizard, higher flowing type, after christmas
2. JT-higher flowing one, whenever
3. 1293 SPRITE, Standard type, ASAP!!

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

Haha I'm a bit slow tonight :/

Thanks :)

On 6th Oct, 2010 JT said:
oi!!!

you jumping the que??? :)


1. Theoneeyedlizard, higher flowing type, after christmas
2. JT-higher flowing one, whenever
3. 1293 SPRITE, Standard type, ASAP!!
4. madmk1 well you know when i need it

I have started posting on Instagram also my name on there is turbomk1golf

Nothing is impossible it just costs more and takes longer.

1. Theoneeyedlizard, higher flowing type, after christmas
2. JT-higher flowing one, whenever
3. 1293 SPRITE, Standard type, ASAP!!
4. madmk1 well you know when i need it
5. quinton, higher flowing type, whenever (will try get hold of a gt2056 for you to check measurements)

http://photobucket.com/quintonrose

how many room do you have between this standard inlet, I'll mesure the twin with a std this we

I may be interested in a higherflowing type for a gt20 early next year. :)

If something is worth doing, it's worth doing half of.

1. Theoneeyedlizard, higher flowing type, after christmas
2. JT-higher flowing one, whenever
3. 1293 SPRITE, Standard type, ASAP!!
4. madmk1 well you know when i need it
5. quinton, higher flowing type, whenever (will try get hold of a gt2056 for you to check measurements)
6. george91 standard type, whenever (before chistmas maybe?)
7. Dark angel, high flow, anytime
8. Billus89 - Standard type - ASAP

1. Theoneeyedlizard, higher flowing type, after christmas
2. JT-higher flowing one, whenever
3. 1293 SPRITE, Standard type, ASAP!!
4. madmk1 well you know when i need it
5. quinton, higher flowing type, whenever (will try get hold of a gt2056 for you to check measurements)
6. george91 standard type, whenever (before chistmas maybe?)
7. Dark angel, high flow, anytime
8. Billus89 - Standard type - ASAP
9. John - High Flow GT20 - New Year

If something is worth doing, it's worth doing half of.