Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > 998cc > probloms in my 998 turbo engine build

gr4h4m

User Avatar

4890 Posts
Member #: 1775
Post Whore

Chester

23rd Jan, 2010 at 12:51:09pm

I had to use spacers under the rocker posts when fitting the 1.5's to my 295.

Simon did my 295 and put 1275 valves in so some were longer than others... You will find some washers under the springs to help equal the pressure...

Hw told ne 295 valves are NLA, how ever I found out on here from V that you can get some from minispares...

I run a supercharger and I don't care the TB is on the wrong side.
VEMS + 12 PSI + Liquid Intercooler = Small Bore FUN!

Home > 998cc > probloms in my 998 turbo engine build
Users viewing this thread: none. (+ 2 Guests) <- Prev  
To post messages you must be logged in!
Username: Password:
Page: