| Page: |
| Home > Good Garages & Parts Suppliers > MRA-Minis | |||||||
 8297 Posts Member #: 408 Turbo Love Palace Fool Aylesbury |
20th Jun, 2009 at 09:56:48am
On 20th Jun, 2009 Sprocket said:
I am totally impartial to this debate 
But I have a genuine Rover Dizzy blanking plug that came from the 1996 Nurburgring 24hr racer that later became P245 WFH Group A rally car that went on to compete in the Montecarlo Rally. This plug is clearly seen in a few pictures in the book 'The Last Works Minis' I also own an 'MRA Minis' plug, which needed a hammer to fit as the O ring was FT!! and I modified it by drilling a hole in the center from the outside and threaded it so I could fit a slide hammer to pull the thing out!! Other than that, both stopped a leak Like this Colin...I made this in 2005 when did you make yours? 
https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel
|
||||||
 8604 Posts Member #: 573 Formerly Axel Podland |
20th Jun, 2009 at 10:08:18am
When the so-called "design right" is a copy of a section of the original dizzy body, then there are no rights that belong to MRA-Minis.
Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
|
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
20th Jun, 2009 at 10:09:55am
Did I not tell you to drill a hole in the middle and thread it On 20th Jun, 2009 matty said:
On 20th Jun, 2009 Sprocket said:
I am totally impartial to this debate
But I have a genuine Rover Dizzy blanking plug that came from the 1996 Nurburgring 24hr racer that later became P245 WFH Group A rally car that went on to compete in the Montecarlo Rally. This plug is clearly seen in a few pictures in the book 'The Last Works Minis' I also own an 'MRA Minis' plug, which needed a hammer to fit as the O ring was FT!! and I modified it by drilling a hole in the center from the outside and threaded it so I could fit a slide hammer to pull the thing out!! Other than that, both stopped a leak Like this Colin...I made this in 2005 when did you make yours?
On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
8297 Posts Member #: 408 Turbo Love Palace Fool Aylesbury |
20th Jun, 2009 at 10:13:30am
PMSL. https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel
|
||||||
 6965 Posts Member #: 507 Fastest A Series Mini in the World leeds/wakefield. |
20th Jun, 2009 at 10:15:25am
i hope that cluch arm is not a direct copy of my titanium ones or you're in bother.
On 20th Jun, 2009 Sprocket said:
Did I not tell you to drill a hole in the middle and thread it 
On 20th Jun, 2009 matty said: On 20th Jun, 2009 Sprocket said:
I am totally impartial to this debate
But I have a genuine Rover Dizzy blanking plug that came from the 1996 Nurburgring 24hr racer that later became P245 WFH Group A rally car that went on to compete in the Montecarlo Rally. This plug is clearly seen in a few pictures in the book 'The Last Works Minis' I also own an 'MRA Minis' plug, which needed a hammer to fit as the O ring was FT!! and I modified it by drilling a hole in the center from the outside and threaded it so I could fit a slide hammer to pull the thing out!! Other than that, both stopped a leak Like this Colin...I made this in 2005 when did you make yours?
|
||||||
 453 Posts Member #: 6449 Senior Member Brisbane, Australia |
20th Jun, 2009 at 11:51:25am
Is there a design right on the a series engine? you could be in a bit of trouble fitting a dizzy blanking plug as it could be deemed an illegal copy. In boost we trust |
||||||
 8215 Posts Member #: 90 Post Whore Somewhere around Swindon |
20th Jun, 2009 at 12:20:50pm
Right i had a PM from martin
Hi Wolfie, With reference to your reply below. 29th May, 2009 at 02:12:10pmPM User | Quote They wont get my money regardless of how quick it turns up, not after martin at MRA decided to threaten someone from here with legal action, all because they were selling dizzy blanking plugs and breaking a copywrite that does not exist and even other companies have sold them for years. BAC imo Edited by wolfie on 29th May, 2009. I am interested in your comments above as it seems to me that you have only heard one side of the argument ? Regards Martin MRA Minis 07789 87**** My Reply On 20th Jun, 2009 wolfie said:
I have your side of the story as i have seen the emails with the threat of legal action, theres two things that baffle me, one is that you clearly did not design the dizzy plugs as they were about before MRA, i made several near on 8 years ago for myself and friends with next to no machining experience, on top of this i blatently copied what dave walker had done so you threatening legal action is clearly a joke, second you have threatened legal action and tried to bully a well known and respected member of the mini community, with your core products being for the mini community this is in my personal view very short sighted. You reap what you sow I personally would not use you and have made my personal reasons clear so blaming decent people like Rob is just digging a bigger hole! This is the last i am going to say on the matter as i see no value in dragging the forum down to your level. Edited by wolfie on 20th Jun, 2009. Crystal Sound Audio said:
Why wolfie...you should have your name as Fuckfaceshithead ! "A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."-Douglas Adams |
||||||
|
Forum Mod 10980 Posts Member #: 17 ***16*** SouthPark, Colorado |
20th Jun, 2009 at 09:56:25pm
What a crock of fucking shit.
Edited by TurboDave16V on 20th Jun, 2009. On 17th Nov, 2014 Tom Fenton said:
Sorry to say My Herpes are no better Ready to feel Ancient ??? This is 26 years old as of 2022 https://youtu.be/YQQokcoOzeY |
||||||
|
6965 Posts Member #: 507 Fastest A Series Mini in the World leeds/wakefield. |
20th Jun, 2009 at 10:37:36pm
On 20th Jun, 2009 TurboDave said:
What a crock of fucking shit. I can't believe you guys are blatantly copying Martins designs and claiming them for your own. Even that Bruno Roule guy who first put the BMW 16v head on an A-series copied one of Martins plugs when he had the miniworld feature in 1993 or whenever it was. Why don't you all just leave him alone to design more quality parts instead of wasting his time with your lies. That's all i have to say on the matter. |
||||||
 524 Posts Member #: 1380 Post Whore Swindon |
20th Jun, 2009 at 10:39:16pm
On 20th Jun, 2009 TurboDave said:
What a crock of fucking shit. I can't believe you guys are blatantly copying Martins designs and claiming them for your own. Even that Bruno Roule guy who first put the BMW 16v head on an A-series copied one of Martins plugs when he had the miniworld feature in 1993 or whenever it was. Why don't you all just leave him alone to design more quality parts instead of wasting his time with your lies. That's all i have to say on the matter. On 2nd Mar, 2008 joeybaby83 said:
neil_g, with all due respect, your the worse salesman on TM since rob_h tried to sell his own ass |
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
2nd Jul, 2009 at 07:32:03pm
Two weeks on and still no explanation as to what it is that I've allegedly done.
Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
29th Jul, 2009 at 11:42:35pm
Edited 11th Nov: Over four months now and still no explanation. Edited by Rob H on 11th Nov, 2009. Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
11046 Posts Member #: 965 Post Whore Preston On The Brook |
26th May, 2011 at 04:01:14pm
I wouldn't use uprated bushes on standard tie bars because they can and do cause the bar to bend, this bending will result in cyclic stresses that may eventually lead to failure...
I suppose its ok for people to hide behind University degrees and qualifications while they talk shite to the lesser person. I mean to sell uprated tiebar bushes and then to say that they shouldn't be fitted to standard tiebars since the bushes 'may' cause more stress on them eventually resulting in failure, is this not coercing the ill educated buyer into heavy duty tie bars from the said same supplier that they do not necessarally need? is it not the fact that the standard tie bars are likely bent from miss use or accident damage, and perhaps suffering from corrossion due to poor maintenance upkeep? Surely the same load is imparted onto the tiebar irrespecteve of the hardness or compressability of the rubber bush? I don't mind people selling stuff thats not really required in the main, or people buying said stuff, its how its 'sold' that fucks me off! And when you question it, I am as good as told I am an idiot. Well there you go
On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
Site Admin  15300 Posts Member #: 337 Fearless Tom Fenton, Avon Park 2007 & 2008 class D winner & TM legend. |
26th May, 2011 at 04:08:37pm
Where has this come from Sprock?
On 29th Nov, 2016 madmk1 said:
On 28th Nov, 2016 Rob Gavin said:
I refuse to pay for anything else Like fuel 😂😂 |
||||||
 (2)[/url] by [url=https://www.flickr.com/photos/150672766@N03/]Rod Sugden[/url], on Fli) 5988 Posts Member #: 2024 Formally Retired Rural Suffolk |
26th May, 2011 at 05:28:07pm
It is from another forum, but then anything you see advertised on the internet is from "somewhere else", the other forum encourages traders to sell their stuff on that forum so no different to any other on-line trader.
Schrödinger's cat - so which one am I ??? |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
26th May, 2011 at 05:36:04pm
Shit. I wobbled up a new spigot thing for the actuator rod eye wotsit on the van's new turbo. I hope garrett don't see the pic and get their lawyers onto me... On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it 
|
||||||
 6729 Posts Member #: 618 Post Whore Glasgow |
26th May, 2011 at 07:32:26pm
your stuffed andy - i'm going to tell them lol! |
||||||
|
16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
26th May, 2011 at 07:58:55pm
No beer for you at Avon then... On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
6729 Posts Member #: 618 Post Whore Glasgow |
27th May, 2011 at 08:37:13am
at this rate there will be on Avon - got no tow car now as the a4 is gone and I've not touched the mini in at least 2 months........ |
||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
18th Nov, 2011 at 03:45:29pm
I wonder if MRA Minis will ever get back to me? Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
8215 Posts Member #: 90 Post Whore Somewhere around Swindon |
18th Nov, 2011 at 04:16:00pm
I doubt it Rob bloke is clearly a cunt Crystal Sound Audio said:
Why wolfie...you should have your name as Fuckfaceshithead ! "A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools."-Douglas Adams |
||||||
| Home > Good Garages & Parts Suppliers > MRA-Minis | |||||||
|
|||||||
| Page: |