| Page: |
| Home > General Chat > Janspeed Turbo | |||||||
|
4314 Posts Member #: 700 Formerly British Open Classic The West Country |
10th Aug, 2014 at 02:57:43pm
On 9th Aug, 2014 rob620 said:
Im looking to make up a manfiold abit like the janspeed turbo conversion to mount my gt17 turbo on. Has anyone done this? Im struggling to see how I can mount it with the brake master cylinder and servo and also the clutch slave cylinder, ive found a decent place for the turbo to sit but worried about the pipework making it all too hot ?. The Janspeed setup was designed for a Metro, they have very different brake servos and cable operated clutches Isambard Kingdom Brunel said:
Nothing is impossible if you are an Engineer |
||||||
|
40 Posts Member #: 10537 Member |
10th Aug, 2014 at 04:56:42pm
Theoneeyedlizard do you have any links to posts about making a manifold for the gt17?.. im useless at using the search as you know :L my other question is what is the highest compression ratio I can run on standard pistons and a metro turbo dozzy with 10psi? Thanks! |
||||||
 7265 Posts Member #: 1268 The Boom Boom speaker Police! Essex |
11th Aug, 2014 at 08:37:16am
I should add that the examples I mention both use bulkhead boxes.
In the 13's at last!.. Just |
||||||
|
40 Posts Member #: 10537 Member |
11th Aug, 2014 at 01:16:32pm
Ok I may have ago at welding one up myself. I know it wont look anything special but it will get me started :) |
||||||
| Home > General Chat > Janspeed Turbo | |||||||
|
|||||||
| Page: |