Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > Show Us Yours! > 998Ti - St2

Paul S

User Avatar

8604 Posts
Member #: 573
Formerly Axel

Podland

Yay, first time out the garage under its own steam😁 Lots to do still but a milestone nevertheless. Next job is to sort out the electrics followed by fitting the uprated front brakes and 10" wheels.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."


hazpalmer

User Avatar

1648 Posts
Member #: 9038
Post Whore

Carlisle, Cumbria

Just converted my drum braked mini to disks on the front. Swapped to disk hubs and some 7.9 4 pots I got from John on here


Turbo Phil

User Avatar

4625 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

Nice to see some progress Paul.

Phil.

WWW.TURBO-MINI.COM


Paul S

User Avatar

8604 Posts
Member #: 573
Formerly Axel

Podland

Why do the little jobs seem to take the longest?

Just had to remove the intercooler and fit clips on all the hoses - took ages and just did not want to go back together - Grrr. Didn't help that I'd not left enough room for the dump valve.

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."


Paul S

User Avatar

8604 Posts
Member #: 573
Formerly Axel

Podland

Other news:

Trial fit of the 10" wheels. Arches is a bit of an issue. Grp 2s are a bit narrow and most other options don't suit the styling. Decided to go with Grp 2s for now.


Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."


robert

User Avatar

6745 Posts
Member #: 828
Post Whore

uranus

very smart paul.

Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM


Paul S

User Avatar

8604 Posts
Member #: 573
Formerly Axel

Podland

A bit more progress.

4 pots and S discs fitted:


Then could fit the 10" inch wheels on the front:


Today I re-jigged the throttle linkage as it was fouling the bonnet:


Next job is to drop the coil mount as the coils are also fouling the bonnet.

At least I can now drive it in and out the barn to work in good light *happy*

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."


Turbo Phil

User Avatar

4625 Posts
Member #: 20
My sister is so fit I won't show anyone her picture

Lake District

Good stuff. Love the trademark “Sturgess” underbonnet styling.


Phil.

WWW.TURBO-MINI.COM


Paul S

User Avatar

8604 Posts
Member #: 573
Formerly Axel

Podland

Snail pace here with my Mini. I've been busy with the Midget, finishing off the bodywork and other things.

Finally got around to fitting the bumpers and arches.




Happy with how they fit, they just cover the tread.

Getting very close to completion, not much else to do to get it on the road :)

Saul Bellow - "A great deal of intelligence can be invested in ignorance when the need for illusion is deep."
Stephen Hawking - "The greatest enemy of knowledge is not ignorance, it is the illusion of knowledge."


hazpalmer

User Avatar

1648 Posts
Member #: 9038
Post Whore

Carlisle, Cumbria

Slow progress is better then no progress! I seem to do the work I've built up with new parts etc, then it comes to a halt as I need to buy more new stuff and the cost mounts.


Yo-Han

User Avatar

971 Posts
Member #: 3228
Post Whore

North of the Netherlands

Nice to see progress, well done
I keep struggling to get on with my van
So as Haz says, any progress is better the none!

Dazed and Confused....

Home > Show Us Yours! > 998Ti - St2
Users viewing this thread: none. (+ 2 Guests) <- Prev  
To post messages you must be logged in!
Username: Password:
Page: