| Page: |
| Home > Show Us Yours! > Mk1 Turbo Racer, never ending project. | |||||||
 4890 Posts Member #: 1775 Post Whore Chester |
12th Aug, 2014 at 09:32:11pm
Granny shifting surely not?.. I run a supercharger and I don't care the TB is on the wrong side.
|
||||||
 6745 Posts Member #: 828 Post Whore uranus |
13th Aug, 2014 at 08:47:54pm
On 6th Aug, 2014 madmk1 said:
Well I have just been here... And made this... 
It was wheel spinning like mad, even with two of us in it and two sat on the wings lol. looking at this a bit more simon , that appears to be 14.27 MPH PER 1000 RPM so either they tested it in 3rd , or you don't have a 3.2 diff in there ? also at a 14.26 mph/1000rpm , then 108 mph works out to 7500 rpm ,so no wonder you were hitting the rev limiter . I think you might find you have a 3.94 in there , or maybe a 3.76. this would also explain why it wheelspun so much on the dyno , and why its hard to get off the line on the boost. im surprised no one at the dyno noticed how slowly it was going . Robert. edit to correct wrong wheel di in the calcs , for some reason I thought the 10" were 60 profile. Edited by robert on 14th Aug, 2014. Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM |
||||||
 1767 Posts Member #: 9165 Previously josh4444 Australia, brisbane |
13th Aug, 2014 at 11:04:37pm
120kph is pretty slow for 5200rpm thats cruising speed lol working over time |
||||||
 5417 Posts Member #: 6181 Double hard bastard brookwood woking |
13th Aug, 2014 at 11:08:21pm
Hi robert yes I am 99.99% sure it was done in 3rd. I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
|
6745 Posts Member #: 828 Post Whore uranus |
14th Aug, 2014 at 06:50:21am
On 13th Aug, 2014 madmk1 said:
Hi robert yes I am 99.99% sure it was done in 3rd. ahh ,that would explain it I guess .would be very unusual though , so were you crossing the line at the pod in 3rd ? that would be roughly 105 mph at 7500 with a 3.2 diff. with a lsd diff best way to check would be to jack it up .put it in 4th...rotate the crank until the wheels had done a full rotation ,and see how many times the crank goes round .that number of rotations would be your diff ratio . not really sure if that would work with an atb or not ! 
Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM |
||||||
|
5417 Posts Member #: 6181 Double hard bastard brookwood woking |
16th Aug, 2014 at 08:20:08pm
What way to work off a hangover then get on the lathe and play with some Ti for an 1hr Edited by madmk1 on 16th Aug, 2014. I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
|
6745 Posts Member #: 828 Post Whore uranus |
16th Aug, 2014 at 08:42:30pm
noice , now get those timing slips up ! Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM |
||||||
|
5417 Posts Member #: 6181 Double hard bastard brookwood woking |
16th Aug, 2014 at 08:44:34pm
You will have them tomorrow mate. I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
 2974 Posts Member #: 10749 Post Whore lowestoft suffolk |
16th Aug, 2014 at 09:54:30pm
Whats that bit for? ^^ On 24th Oct, 2015 jonny f said:
Nothing gets past Dave lol NOTHING GETS PAST ME!! 
1/4 mile 14.7 @ 96mph 12psi boost Showdown class A 2nd place 18.6 @ 69mph |
||||||
|
5417 Posts Member #: 6181 Double hard bastard brookwood woking |
16th Aug, 2014 at 09:57:47pm
It's the pulley bolt and washer I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
|
230 Posts Member #: 1131 Senior Member |
29th Aug, 2014 at 04:06:06pm
Impressive build |
||||||
|
5417 Posts Member #: 6181 Double hard bastard brookwood woking |
29th Aug, 2014 at 08:09:35pm
Think you very much mate I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
 2094 Posts Member #: 9894 Post Whore Dorking |
29th Aug, 2014 at 08:14:00pm
Bolt looks great.
|
||||||
 3673 Posts Member #: 9300 Post Whore Quarry Bonk |
29th Aug, 2014 at 08:23:40pm
Going twink are we? On 26th Jan, 2012 Tom Fenton said:
ring problems are down to wear or abuse but although annoying it isn't a show stopper On 5th Aug, 2014 madmk1 said:
Shit the bed! I had snapped the end of my shaft off!! 17.213 @ 71mph, 64bhp n/a (Old Engine) |
||||||
|
4304 Posts Member #: 1321 Post Whore Wiltshire |
29th Aug, 2014 at 08:29:26pm
Well its in the open now, Fancy de-lobing my cam? Edited by minimole23 on 29th Aug, 2014. On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding |
||||||
 7265 Posts Member #: 1268 The Boom Boom speaker Police! Essex |
29th Aug, 2014 at 08:46:29pm
What have you done!!! That was a good cam. In the 13's at last!.. Just |
||||||
|
5417 Posts Member #: 6181 Double hard bastard brookwood woking |
29th Aug, 2014 at 11:10:44pm
Jonny chop blocks are the way ahead I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
 11046 Posts Member #: 965 Post Whore Preston On The Brook |
30th Aug, 2014 at 08:37:14pm
When I picked up my lobeless camshaft from the machine shop, the other bloke's face that was waiting to be served was a picture On 26th Oct, 2004 TurboDave16v said:
Is it A-Series only? I think it should be... So when some joey comes on here about how his 16v turbo vauxhall is great compared to ours, he can be given the 'bird'... On 26th Oct, 2004 Tom Fenton said:
Yep I agree with TD........ |
||||||
|
5417 Posts Member #: 6181 Double hard bastard brookwood woking |
30th Aug, 2014 at 08:40:04pm
On 30th Aug, 2014 Sprocket said:
When I picked up my lobeless camshaft from the machine shop, the other bloke's face that was waiting to be served was a picture  Lol. Lol. Lol. I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
|
1767 Posts Member #: 9165 Previously josh4444 Australia, brisbane |
30th Aug, 2014 at 08:42:37pm
haha nice |
||||||
|
6745 Posts Member #: 828 Post Whore uranus |
31st Aug, 2014 at 07:49:54am
On 30th Aug, 2014 Sprocket said:
When I picked up my lobeless camshaft from the machine shop, the other bloke's face that was waiting to be served was a picture colin,you should have said to him "its not lobeless , im just using 100:1 rockers ... deadpan ,and walk off. Medusa + injection = too much torque for the dyno ..https://youtu.be/qg5o0_tJxYM |
||||||
|
5417 Posts Member #: 6181 Double hard bastard brookwood woking |
4th Sep, 2014 at 07:29:57pm
Starting to build up now I have started posting on Instagram also my name on there is turbomk1golf
On 1st Nov, 2007 Ben H said:
There is no such thing as 'insignificant weight saving', it all adds up. |
||||||
 16540 Posts Member #: 4241 King Gaycharger, butt plug dealer, Sheldon Cooper and a BAC but generally a niceish fella if you dont mind a northerner Rotherham, South Yorkshire |
4th Sep, 2014 at 07:45:56pm
Sly bastard. I see a K head end plate in that box. On 11th Feb, 2015 robert said:
i tried putting soap on it , and heating it to brown , then slathered my new lube on it
|
||||||
|
4890 Posts Member #: 1775 Post Whore Chester |
4th Sep, 2014 at 07:51:34pm
so do I I run a supercharger and I don't care the TB is on the wrong side.
|
||||||
|
4304 Posts Member #: 1321 Post Whore Wiltshire |
4th Sep, 2014 at 07:59:09pm
Will this new engine retain forced induction? On 7th Oct, 2010 5haneJ said:
yeah I gave it all a good prodding |
||||||
| Home > Show Us Yours! > Mk1 Turbo Racer, never ending project. | |||||||
|
|||||||
.
| Page: |