Donations towards server fund so far this month.

 
£0.00 / £100.00 per month
Page:
Home > FAQ / Knowledge > Megajolt - A brief installation guide

Joe C

User Avatar

12307 Posts
Member #: 565
Carlos Fandango

Burnham-on-Crouch, Essex

Ignore the TDC mark,

the usual setup is,

with the engine at no 1 TDC the missing tooth is at the top, and as you say the bracket (sensor) is 90 degrees away, at the front of the engine, or 9 0 clock looking at the damper.

On 28th Aug, 2011 Kean said:
At the risk of being sigged...

Joe, do you have a photo of your tool?



http://www.turbominis.co.uk/forums/index.p...9064&lastpost=1

https://joe1977.imgbb.com/



Johnny

User Avatar

1183 Posts
Member #: 6926
Post Whore

Accrington

one question, is there a wiring installation guide? (one with fuse ratings) im trying to find out what fuse to use for both MJ and Edis (i bought a kit of a friend who already wired it all up and made it into a loom. and as a result there is a spade connector with 2 wires going into it (one for MJ and one for Edis) so what fuse would you reccomend? it says 2amps for the megajolt in this topic but what about with both on the same circuit? Cheers Johnny.

Home > FAQ / Knowledge > Megajolt - A brief installation guide
Users viewing this thread: none. (+ 1 Guests) <- Prev  
To post messages you must be logged in!
Username: Password:
Page: