Complete Bolt On GT2056 Setup (Back up for sale)
Turbo Mini Forums

Bought this off Brett but the impending arrival of twins has resulted in some changed priorities! Shame really as I was sooo looking forward to using it!

Keep your eye's open for more bits coming up for sale as I'm planning on getting rid of the Clubby and all the shiny bits I had bought for it. On to the advert!!!

In this pretty much bolt on setup is:-

Metro Turbo exhaust manifold modified to suit the GT20, the ports have been opened out to the manifold gasket, the dividers have been cut back and the manifold very well ported, it comes fully assembled with the turbo on it using a Paul S T3-T2 adapter plate which Brett blended to match both the turbo and manifold. The downpipe was made by Brett and was the 3rd version (the turbo to downpipe flange is also a Paul S item), it can be fitted/removed with the engine in place and puts the exhaust in about the same place as a normal system, it starts at 63mm and works its way down to 51mm and will mate via a slip joint to a standard 2 inch system complete with wideband boss.

Genuine Garrett GT2056 bought from cossierick in the group buy (less than 2000 miles). Actuator has been relocated and the housing clocked to suit mini installation, the wastegate port has also been opened up as Brett had issues with boost creep at high rpm (porting the wastegate resolved this)

Also included is the braided oil feed (this cost over £80 as is gen aeroquip stuff) and turbo to block oil return including a new length of oil hose.

I haven't taken any current pictures yet as it's wrapped up in a box under my workbench but have put some pictures up from Brett's old for sale thread and build thread. Everything looks the same (except a bit dirtier! lol)

I paid Brett £525 (had to search through my bank statements for this! I was sure I paid more) for this setup so would like £500.

Can deliver to MITP or the IMM.

Current Downpipe


Turbo on Manifold (old version of DP)


Oil Feed bits (from brett's build thread)


Oil return (from brett's build thread)

Edited by John on 11th Aug, 2014.

If something is worth doing, it's worth doing half of.

I would take the turbo by itself if you decide to split john.

My build thread: http://www.turbominis.co.uk/forums/index.php?p=vt&tid=454802

Flickr: http://www.flickr.com/photos/85313398@N02/

Thanks for the interest Dan, problem being then it would leave me with a manifold, dp, oil feed etc so unless someone wants that lot too I don't really want to split.

You know you want to just take the lot and sell your manifold & stuff!

If something is worth doing, it's worth doing half of.

Thats fair enough John, i just don't need the other bits. Let me know if you do split. :)

My build thread: http://www.turbominis.co.uk/forums/index.php?p=vt&tid=454802

Flickr: http://www.flickr.com/photos/85313398@N02/

god dam you john I so want this, need more booooost

Done now needs redoing lol

Id have it back if I had a use for it, fantastic turbo

Yes i moved to the darkside

Instagram @jdm_brett

Would you like to buy a clubman to go with it? Lol

If something is worth doing, it's worth doing half of.

bogof?

Yes i moved to the darkside

Instagram @jdm_brett

I only have one turbo and one clubby unfortunately Brett. I will however throw in a rubber chicken and a MITP Kebab if you buy both.

If something is worth doing, it's worth doing half of.

It's a good deal Brett, John gives nothing away!

I will split but would need buyers for everything.

Turbo £260
Manifold, DownPipe, Drain £200
Aeroquip Oil Feed £40

Edited by John on 29th Aug, 2014.

If something is worth doing, it's worth doing half of.

Put me down for the oil feed John if you do split.

No worries Tom you have first dibs on it.

If something is worth doing, it's worth doing half of.

On another note the manifold will fit a T2, GT17 or anything else that has a T2 flange!

If something is worth doing, it's worth doing half of.

Was just going to say that..

Yes i moved to the darkside

Instagram @jdm_brett

Hey John,
I would have the Turbo if its split and available.
Cheers
Andy

Doh, just noticed Dan has first dibs on the turbo above!

I will take the turbo john.

My build thread: http://www.turbominis.co.uk/forums/index.php?p=vt&tid=454802

Flickr: http://www.flickr.com/photos/85313398@N02/

Ok then just the manifold, dp and drain. I'd split these too.

If something is worth doing, it's worth doing half of.

Pming you about the downpipe now :)

They don't die, they just get faster!

No good for a T2 shauna

If something is worth doing, it's worth doing half of.

No problem, thanks for letting me know :)

On 9th Jul, 2014 John said:
No good for a T2 shauna

They don't die, they just get faster!

SOLD!!

Oh no it isn't!

Edited by John on 8th Aug, 2014.

If something is worth doing, it's worth doing half of.

who is the lucky victim?

Yes i moved to the darkside

Instagram @jdm_brett

Due to a buyers change of heart this is back up for sale! MITP delivery possible!

Edited by John on 9th Aug, 2014.

If something is worth doing, it's worth doing half of.