Gauging interest GT17 manifold- UPDATE 08/01
Turbo Mini Forums

There seems to be a lot of interest in these again, and things have settled down at home with the little one now. If there is enough interest I'll make another batch up. Price will be £250 + postage.

They are made out of 316 stainless and don't require any mods to the bulkhead. You will need to buy an adjustable steady as the engine will need to be tilted forward slightly. These manifolds will work with the turbo manifold and the standard NA type.







Cheers
Matt

Edited by matty on 11th Aug, 2011.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Possibly. but not till after christmas now.

Is that a GT17 fitted in the pic?

In the 13's at last!.. Just

Haha actually its a T2.

Timescale would probably be a couple of months or so.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

matty will it fit a gt20? or would i still need my bulkhead box?

http://photobucket.com/quintonrose

I have to be honest, ive never seen a gt20 close up, but judging on how tight the 17 is I would say you'd need a bulkhead box.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Im looking for a GT17 and dont need a bulkhead box, but maybe you could do a better flowing manifold if you had more space ?.

mmm right ok. might have a look at tigging up an equal length one for my gt20

http://photobucket.com/quintonrose

Would you make one of the nice shape one? I'm interested in manifold wich would clear a twin carb inlet.I 'vent any free time to work on the mini these days...too busy
What about?

Sold!!!! I will have one please Matty :)

hiya do they come with a downpipe or does the normal one fit?

My small bore turbo project http://www.turbominis.co.uk/forums/index.php?p=vt&tid=473901

I'd take one if you would ship to the U.S.....pleeeez....

Eric
my pics.... http://www.fototime.com/inv/7AAF37CF3EFA956

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

On 3rd Oct, 2010 EricsAmerica said:
I'd take one if you would ship to the U.S.....pleeeez....

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

Extra shipping cost is expected....should be a lot cheaper than the 1-off custom coilovers that are coming soon for the ADO from the UK too...

Eric
my pics.... http://www.fototime.com/inv/7AAF37CF3EFA956

haha woot, no worries matty.

i would offer to take some more pics for you in the car but manifold is currently off getting the thickness matched to the inlet at the local machinist.

Definately sold I'll take one 100%

Would you quote me a price for one of?

On 3rd Oct, 2010 matty said:

On 3rd Oct, 2010 fab said:
Would you make one of the nice shape one? I'm interested in manifold wich would clear a twin carb inlet.I 'vent any free time to work on the mini these days...too busy
What about?

I have thought about making the other type, as I do prefer the design, but they take nearly twice as long to make and cost more and I don't want the price to escalate beyond being affordable.

Hi Matty,I would be interested in one of these.(a standard one,not the Fab special!)

'Where does the engine go?'

I will take one. It's for a midget with a GT1752. Tell me when they are ready,

Okay so there seems to be enough interest.

Rick - If you supply the flanges I'll do it for the same price. Have you got a bulkhead box?

Fab - do you have a bulkhead box? The one I made was for a mini WITH a bulkhead box. I might be able to make it fit in without the box though, but will have to get back to you on that! Price will be nearer the £300 mark?

I plan to make them up for the end of Nov (gives me time to source parts and make them up)!

I would need a desposite of £100 before I make them, to cover the cost of materials and getting them welded. Once they're complete, it'll be either payment on collection or we'll sort out postage on final payment (I think its about £8-£10) to send uk for each manifold.

If you definitely want one please can you add your name to the list.

1.
2.
3.

Cheers
Matt

Edited by matty on 4th Oct, 2010.

https://www.facebook.com/pages/Fusion-Fabri..._homepage_panel

www.fusionfabs.co.uk



1/4mile in 13.2sec @ 111 terminal on 15psi

is there a pic of the 'nice shape one'?

i would be interested in one that flows better than a standerd manifold. which obviously would require a bulkhead box. and cost more.

thanks
josh

My build thread..

http://www.turbominis.co.uk/forums/index.php?p=vt&tid=542985

If there is a higher flowing one put me on the list. I already have the bullhead box.

Please put me on the list Matty. I deffo would like one. Please PM your payment details and i will try to sort out the deposit this weekend :)

i would definitely be interested, would like to see the other design too if possible.